Monday, August 15, 2011

Pyle PLDN37R 3.5mm/1/8-Inch To RCA Stereo Audio Ground Loop Isolator/Audio Line Driver

Pyle PLDN37R 3.5mm/1/8-Inch To RCA Stereo Audio Ground Loop Isolator/Audio Line Driver Review



Pyle PLDN37R 3.5mm/1/8-Inch To RCA Stereo Audio Ground Loop Isolator/Audio Line Driver Feature

  • 3.5mm / 1/8'' Female Stereo (Left/Right) Audio Input - Breaks Ground Loops to Eliminate Engine Interference.
  • RCA Male Stereo (Left/Right) Audio Output - Designed for use with all audio players with 3.5mm /1/8''(mp3, iPod, etc.) Into Radio / Source units with RCA ports audio inputs
  • 6 Volt Audio Line Driver
  • Wide Input Signal Range 50mv-6v
  • Designed to filter out engine noise emitted from devices while on charge
Eliminate the electrical noise and hum caused by ground loops with this ground loop isolator. These problems typically occur when multiple components receive power from different locations. This isolator solves that problem by providing ground path isolation between components while maintaining full frequency response. This device is designed to work with an iPod with a dock connector. It provides a 3.5mm jack to stereo RCA plug setup.


No comments:

Post a Comment